PUKYONG

탈황처리된 재생고무/천연고무 블렌드의 특성

Metadata Downloads
Alternative Title
The characteristic of desulfurization recycled rubber/natural rubber blend
Abstract
신발 Out-sole 스크랩을 이용해 탈황 처리된 재생고무와 천연고무를 블렌드하여 블렌드물을 제조하였으며, 이 블렌드물의 가황거동, 물리적 특성, 내유성 및 기타 물성 등을 측정하여 다음과 같은 결론을 얻었다.
재생고무 블렌드 함량에 따른 블렌드물의 가황 특성은 재생 고무의 비율이 증가할수록 전체적인 가황 시간이 감소하였는데, 이는 재생고무에 존재하는 가황촉진제 및 가황제가 블렌드물로 확산되어 가황반응에 참여하기 때문이다.
유변학적 특성을 살펴보면, 재생고무 함량이 증가함에 따라 점도가 증가하였는데 이는 재생고무에 존재하는 충전제로 인한 결과이며 재생고무 블렌드시에 고려해야 할 점으로 판단된다.
천연고무와 비교하여 재생고무를 첨가하면 인장강도 및 신장률 등의 기계적 물성은 감소하였으며, 이는 본 연구에서 재생고무가 재생과정에서 고무사슬 절단이 동시에 일어났기 때문으로 생각된다.
내마모 측정 시험에서는 일정 함량 범위까지 내마모성이 유지되는 특성을 보였으며, 이는 재생고무에 존재하는 합성고무의 영향으로 판단된다.
SEM 측정 결과 재생고무 함량 증가에 따라 표면이 거칠어지고 작은 구멍(Hole)이 많아 지는 것을 볼 수 있었다. 이는 재생고무가 첨가제 및 보강제의 분산을 방해한 것으로 판단된다.
To the development of high-fat has become a human life. But, serious environmental pollution has a big problem. Goodyear rubber industry due to the rapid growth since the sulfur bridge was found. Goodyear rubber industry due to the rapid growth since the sulfur bridge was found. However, pollution of the abandoned rubber is the larger issue. To reduce environmental pollution and excessive waste of resources, this is a different experiment. However, the limitations of the castle, because the recycled rubber is used only in a limited range.
This research on the content of recycled rubber Viscosity Cure Rate and observed changes.
This study, by changing the amount of recycled rubber observed changes in cure rate and viscosity. cure rate in recycled rubber content was measured using the ODR(oscillating disk rheometer). In addition, by using the UTM(universal testing machine, measure the mechanical properties of test pieces were manufactured. Abrasion resistance was measured by NBS equipment.
Author(s)
박종현
Issued Date
2009
Awarded Date
2009. 2
Type
Dissertation
Keyword
재생고무/천연고무
Publisher
부경대학교 대학원
URI
https://repository.pknu.ac.kr:8443/handle/2021.oak/10872
http://pknu.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000001955013
Alternative Author(s)
Park, Jong hyun
Affiliation
부경대학교 대학원
Department
대학원 고분자공학과
Advisor
박찬영
Table Of Contents
Ⅰ. 서론 = 1
Ⅱ. 이론적 배경 = 4
2.1. 고무의 재생 = 4
2.1.1. 열분해 = 4
2.1.2. 미세 분쇄 = 4
2.1.3. 탈황 = 5
2.2. 고무의 가황 mechanism) = 6
2.3. 고무의 점탄성(Viscoelasticity) = 8
2.4. 고무 재료 및 충전제의 특성 = 9
2.4.1. 천연고무( Natural Rubber ) = 9
2.4.2. 고무의 보강 = 10
2.4.3. 충전제의 특성 = 11
2.5. 고무 블렌딩 방법과 특성 = 15
2.5.1. 블렌딩 방법 = 15
2.5.2. 블렌딩 고무의 특성 = 16
Ⅲ. 실험 = 20
3.1. 실험 재료 = 20
3.1.1. 천연고무( Natural Rubber ) = 20
3.1.2. 재생고무 = 21
3.1.3. 보강제 = 22
3.1.4. 가교제 및 촉진제 = 22
3.1.5. 활성화제 = 24
3.1.6. 기타 첨가제 = 24
3.2. 실험장치 = 25
3.2.1. kneader = 25
3.2.2. Roll mill = 25
3.2.3. Hot press machine = 25
3.2.4. Oscillating disk rheometer(ODR) = 25
3.2.5. Universal testing machine(UTM) = 26
3.2.6. Hardness tester = 26
3.2.7. Densitometer = 26
3.2.8. NBS tester = 26
3.2.9. Mooney viscometer = 26
3.3. 배합 및 시편의 제조 = 27
3.4. 고무 시편의 물성 및 특성 = 31
3.4.1. 가황특성 = 31
3.4.2. 유변학적 특성 = 31
3.4.3. 기계적 물성 = 32
3.4.4. 내마모 시험 = 33
Ⅳ. 결과 및 고찰 = 34
4.1. 가황 특성 = 34
4.2. 유변학적 특성 = 43
4.3. 기계적 물성 = 45
4.4. 내마모성 = 50
4.5. SEM = 52
Ⅴ. 결론 = 56
참고문헌 = 57
Degree
Master
Appears in Collections:
대학원 > 고분자공학과
Authorize & License
  • Authorize공개
Files in This Item:

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.