초고층 주거복합 건축물의 입면디자인 패턴에 관한 연구
- Alternative Title
- A Study on the Facade Design Pattern of Residential High-Rise Building
- Abstract
- 국내의 초고층 건축물은 80년대 준공된 대한생명 63빌딩과 삼성동 무역센타, 역삼동 스타타워까지 대다수의 건축물이 오피스 용도의 건축물이었다.
1990년도 후반 도곡동 타워펠리스(66층)의 초고층 주거용 건축물의 설계를 시작으로 국내에는 수많은 초고층 주거건축물이 건축되기 시작한다.
또한 세계적으로 초고층 주거복합 건축물이 활발하게 진행 중에 있고 현재 완공 또는 건설 중이거나 승인을 받은 40층 이상 초고층 주거용 건축물은 모두 2000개 이상이며, 우리나라에서도 76개로서 세계4위에 해당하는 초고층 건축물 건설 국가이다.
이처럼 국내의 초고층 주거복합 건축물이 수없이 건설되고 있으며, 국내의 초고층 TOP 10중 주거용 건축물의 비중이 대다수 차지하고 있고, 또한 지역의 랜드마크를 부여하는 중요한 도시경관의 요소로 부각이 되고 있지만, 비주거용의 일반 초고층 건축물에 비해 초고층 주거복합 건축물은 구조시스템, 법규 등 제약에 따라 입면의 형태가 다양성이 결여된다.
본 연구는 2000년도 이후에 준공 또는 설계가 완료되어 진행 중인 50층 이상의 국내 초고층 주거복합 건축물의 입면 디자인 형태를 대표적인 사례를 통해 파악하여, 입면디자인의 패턴을 인식하고 향후 계획 되어지는 초고층 주거복합 건축물의 다양한 입면디자인의 요구에 부응할 수 있는 패턴을 디자인하기 위한 참고 자료로서 활용하는 것이 연구의 목적이다.
초고층 주거복합 건축물의 입면디자인 패턴은 입면디자인에 직접 영향을 주는 구조시스템 과 외벽을 구성하는 외장재에 따라 4가지로 분류하였다. 각 패턴별로 나타나는 건축물의 입면디자인의 특징은 사례분석을 통하여 정리하였으며 준공연도와 규모에 따라 패턴이 적용되어 변화되는 흐름을 알아보았다.
도곡동에서부터 시작된 고급화, 차별화된 초고층 주거복합 건축물은 초기 구조 시스템의 한계로 인하여 SRC 구조와 커튼월(Fully Curtain Wall) 시스템의 외장재로서 주로 알루미늄 복합 판넬이 입면디자인 요소로서 건축 되었으나, 고강도 콘크리트의 개발과 함께 RC 구조로서 초고층 건축물의 구조시스템이 가능함에 따라 입면디자인의 패턴도 이에 따라 변화함을 알 수 있었다. RC벽식 구조시스템은 시스템 창호의 크기와 도장재료, 즉 외벽의 색채계획에 따라 입면디자인이 결정되었고, 플랫 플레이트 시스템의 적용이후 외벽과 창호면적의 변화로 다양한 입면의 변화를 가져 왔다. 이후 시대적인 요구와 주거시장의 고급화 추세에 따라 커튼월 시스템과 복합 판넬 등의 외장재를 적용함으로서 입면디자인을 결정하는 외벽의 구성이 더욱 다양하게 변화됨을 알 수 있었다. 또한 초고층 건축물의 규모가 46층에서 66층 고층화로 지속되는 동안 4가지로 분류한 입면디자인 패턴도 이에 따라 변화되는 흐름을 알 수 있었다.
현재까지 준공 및 계획이 완료되어 건립이 진행 중인 초고층 주거복합 건축물의 형태는 기능적이고 구조적인 측면에서 벗어나서, 조형적인 미와 도시의 지역성 및 랜드마크를 구축하는데 의미를 부여하고 있다. 또한 단순한 형태의 미(美)에서 벗어나서, 각 건축물마다 복합적이고 개성이 독특한 형태의 변화와 더불어 이에 따른 입면디자인 패턴의 경향도 변화됨을 알 수 있었다.
The High-Rise building of domestic was completed 80's the 63 building against and Samsung Dong Trade-Center the other which it counts, until the Yok Sam Dong Star Tower the building of majority Office was the building of use.
Latter half 1990 the Tower-Palace (66 layer) plan of Residential High-Rise building to domestic the numerous Residential High-Rise building is built is started with start.
Also Residential High-Rise building being active world-wide, it is to in the process of advancing and currently it is in the process of completing or construction or Residential High-Rise building above 40 layer which is approved is above all 2000, as 76 things it is a Residential High-Rise building construction nation which corresponds to world-wide 4 place even from our country.
Like the Residential High-Rise building of this domestic is constructed countlessly, the specific gravity of the house building in High-Rise building TOP 10 of domestic is doing majority hold, also is becoming the angle of depression with element of the city view which is important gives the land mark of the area, it compares in the general High-Rise building of the rain house and the Residential High-Rise building follows in structure system and law back restriction and if the mouth the form lacks variety.
The research which it sees 2000 completion or plan is completed in after and if the mouth of the domestic Residential High-Rise building above 50 layers which are in the process of advancing design form representative instance it leads and it grasps,, if the mouth it recognizes if hereafter the mouthful the Residential High-Rise building which comes to be planned various it will can suit in demand of design pattern and design as the reference data for the fact that it applies is objective of research.
If the facade design pattern of the Residential High-Rise building if facade design it followed outside composes a structure system and the outer wall which give a direct effect to design and it classified with 4 branches. If each facade design pattern of the building which appears especially the feature of design and instance analysis to arrange at completion year and the size it followed and the pattern was applied and it changes it flows it examined.
From Doe-Gok it was started, is discriminated the Residential High-Rise building which upgrades and initially about lower SRC structure and curtain wall (Fully Curtain Wall) system aluminum composition sold mainly in limit of rescue system and this facade design element it was built, with development of the high-in-tensity concrete as RC structure the structure system of Residential High-Rise building was possible together to follow and if facade design pattern followed hereupon and it changes the possibility of knowing it was. The RC the wall structure system followed in color plan of system window favor size and the coating with paint material and the namely outer wall and if the facade design was decided, if a change and the various with change of the application after outer wall and the window good area of flat plate system it had it came. It follows in upgrade tendency of after time demand and facade design and curtain wall system and composition it sells and if re- outside it applies as facade design, the composition of the outer wall which decides a design was various more and it changes the possibility of knowing it was. If also size of Residential High-Rise building from 46 layer 66 layer high while being continued, the facade design which it classifies with 4 type also the design pattern followed and it changes it flows the possibility of knowing it was.
Currently the completion and plan are completed and the form of Residential High-Rise building where the erecting is in the process of advancing escapes from the function and structure side, constructs the area characteristic and a land mark of mold good and the city place meaning which it gives. Also from good of the form which is simple it escapes, each building composition and with change of the form whose identity is unique it joins in and if facade design pattern which it follows hereupon it changes the possibility of knowing there was also a tendency of facade design pattern.
- Author(s)
- 임우영
- Issued Date
- 2008
- Awarded Date
- 2008. 2
- Type
- Dissertation
- Keyword
- 초고층 입면디자인 주거복합 건축물
- Publisher
- 부경대학교 산업대학원
- URI
- https://repository.pknu.ac.kr:8443/handle/2021.oak/11677
http://pknu.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000001984418
- Alternative Author(s)
- Lim, Woo-Young
- Affiliation
- 부경대학교 산업대학원
- Department
- 산업대학원 건축학과
- Advisor
- 김기환
- Table Of Contents
- Ⅰ. 서론 = 1
1.1 연구의 배경 및 목적 = 1
1.2 연구의 범위 및 방법 = 2
Ⅱ.이론적 고찰 = 4
2.1 초고층 건축물의 특성 = 4
2.1.1 초고층 건축물의 정의 = 4
2.1.2 초고층 건축물의 역사 = 4
2.2 초고층 건축물의 현황 = 6
2.2.1 세계의 초고층 건축물의 현황 = 6
2.2.2 국내의 초고층 건축물의 현황 = 8
2.3 초고층 주거건축물의 제한 요소 = 13
2.3.1 주거건축물의 특성에 의한 요소 = 13
2.3.2 국내외 법규적인 요소 = 13
2.3.3 시공성에 여건에 의한 요소 = 14
Ⅲ. 구조시스템 및 외장재에 따른 입면 디자인 패턴(Pattern)분류 = 15
3.1 입면디자인 구성 요소 = 15
3.1.1 초고층 건축물의 입면디자인 요소 = 15
3.1.2 구조시스템 및 외장재에 의한 분류 = 17
3.2 Pattern A 형태 = 18
3.2.1 RC 벽식구조 + 외벽(도료마감) + 시스템 창호(PunchedWindow) = 18
3.2.2 Pattern A 건축물 사례 = 20
3.3 Pattern B 형태 = 22
3.3.1 RC 라멘구조(Flat Plate Slab) + 외벽(도료마감)시스템 창호(PunchedWindow) = 22
3.3.2 Pattern B 건축물 사례 = 24
3.4 Pattern C 형태 = 28
3.4.1 RC 라멘구조(Flat Plate Slab) + 복합판넬 + 커튼월 시스템(FullyCurtainWall) = 28
3.4.2 Pattern C 건축물 사례 = 30
3.5 Pattern D 형태 = 33
3.5.1 SRC(RC) 구조 + 복합판넬 + 커튼월 시스템(Fully Curtain Wall) = 33
3.5.2 Pattern D 건축물 사례 = 35
Ⅳ. 입면디자인 패턴 분류에 의한 경향 분석 = 40
4.1 입면디자인 요소로서의 구조시스템 및 외장재 = 40
4.2 패턴 변화요인에 의한 분석 = 41
4.2.1 준공연도에 의한 분석 = 41
4.2.2 지역에 의한 분석 = 43
4.2.3 국내외 건축가에 의한 분석 = 44
4.2.4 국내외 구조 설계자에 의한 분석 = 46
4.2.5 건축물의 규모에 의한 분석 = 48
4.3 유형별 패턴의 종합분석 = 50
Ⅵ. 결론 = 53
참고문헌 = 55
Abstract = 56
감사의 글 = 59
- Degree
- Master
-
Appears in Collections:
- 산업대학원 > 건축학과
- Authorize & License
-
- Files in This Item:
-
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.