PUKYONG

살균용 UV-C발광 Y2Si2O7:Pr3+ 박막형광체의 Up-conversion 특성

Metadata Downloads
Abstract
The film was spin-coated on the quartz substrate with Y-Si-Pr stoichiometric-contained solution, and then annealed at high temperature around 1300 ℃ in a air atmosphere. The obtained film showed the triclinic structure of Y2Si2O7:Pr3+ phosphor. It showed the broad Pr3+-based f-d transitional down-conversion spectrum with a main peaks at 267 nm by a high-energy excitation of 220 nm. Some surface cracks was minimized by controlling acid concentration of the solution, and the optimized film showed the crack-free surface morphology and the thickness of about 600 nm. The phosphor film showed strong UV-C emission with a main peak of 267 nm by a lower-energy light in the blue region, which is coincident with the germicidal action curve. Finally, the sterilization of microalgae was demonstrated by the UV-C Up-conversion phosphor under an excitation of 464 nm blue LEDs, and thus their population are linearly decreased with time elapse.
Author(s)
박재형
Issued Date
2017
Awarded Date
2017. 2
Type
Dissertation
Keyword
UV-C발광 Y2Si2O7:Pr3+ 박막형광체
Publisher
부경대학교 대학원
URI
https://repository.pknu.ac.kr:8443/handle/2021.oak/13711
http://pknu.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000002333837
Affiliation
부경대학교 대학원
Department
대학원 융합디스플레이공학과
Advisor
김종수
Table Of Contents
제 Ⅰ장 서 론 1
제 Ⅱ장 문헌연구 5
제 1절 Sol-gel 정의 5
1.1 Sol-gel 반응 5
제 2절 Spin-coating 8
2.1 Spin-coating 공정 8
제 3절 형광체(Phosphor) 10
3.1 형광체의 정의 10
3.2 형광체의 구성요소 - 모체(Host lattice) 11
3.3 형광체의 구성요소 - 활성제(Activator) 12
3.4 형광체의 구성요소 - 증감제(Sensitizer) 12
3.5 상방전환(Up-conversion, UC) 14
3.6 에너지 전달(Energy transfer, ET) 16
3.7 온도 소광현상(Thermal Quenching, TQ) 18
제 4절 Activator의 에너지 준위 20
4.1 란탄족원소의 에너지 준위 20
4.2 Pr3+ 이온의 특성 및 에너지 준위 23
제 Ⅲ장 실험 25
제 1절 Sol-gel 용액 제조 및 Spin-coating 25
1.1 Sol-gel 용액의 제조 25
1.2 Spin-coating 공정 및 열처리 조건 27
1.3 Tube-type 형광체 Coating공정 및 열처리 조건 29
제 2절 UV-C Y2Si2O7:Pr3+ 박막형광체의 특성평가 31
2.1 XRD(X-ray diffraction)측정 32
2.2 PL(Photo luminescence)측정 33
2.3 미세조류 살균(Sterilization)측정 34
제 Ⅳ장 결과 및 고찰 35
제 1절 UV-C Y2Si2O7:Pr3+ 박막형광체의 구조적 특성 35
1.1 UV-C Y2Si2O7:Pr3+ 박막형광체의 표면형상분석 35
1.1.1 UV-C Y2Si2O7:Pr3+ 박막형광체의 표면 35
1.1.2 Y2Si2O7:Pr3+ 박막형광체의 표면 미세분석 37
1.2 Tube-type UV-C Y2Si2O7:Pr3+ 박막형광체의 표면 41
1.3 UV-C Y2Si2O7:Pr3+ Cross-section 분석 43
1.4 UV-C Y2Si2O7:Pr3+ 박막형광체의 XRD 분석 45
제 2절 Y2Si2O7:Pr3+ 박막형광체의 광학적 특성 48
2.1 UV-C Y2Si2O7:Pr3+ 박막형광체의
Down-conversion PL / PLE 분석 48
2.2 Tube-type UV-C Y2Si2O7:Pr3+ 박막형광체의
Up-conversion PL / PLE 분석 52
제 3절 Tube-type UV-C Y2Si2O7:Pr3+ 박막형광체의
살균처리 특성 56
3.1 Tube-type UV-C Y2Si2O7:Pr3+ 박막형광체의 살균특성 56
제 Ⅴ 장 결 론 61
제 Ⅵ 장 참고 문헌 63
Degree
Master
Appears in Collections:
대학원 > 융합디스플레이공학과
Authorize & License
  • Authorize공개
Files in This Item:

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.