PUKYONG

자외선 폭로환경 하에서 에폭시 수지의 재도장 간격에 따른 방식성능 연구

Metadata Downloads
Abstract
Study of corrosion protection property with re-coating interval of unpigmented epoxy resin by UV exposure has been investigated. Re-coating interval was controlled by UV exposure that is one of the significant aging factors. Crosslinked amine-cured epoxy coating exposed UV environments, using QUV accelerated weathering tester is to make UV conditions. Samples after UV exposure were measured by transmission fourier transform infrared spectroscopy-attenuated total reflectance spectroscopy (FT/IR-ATR), and samples were applicated second coating using same epoxy resin. The effects of UV exposure on corrosion protection properties were examined by salt spray test. Aging samples were evaluated by pull-off adhesion test, creepage from scribe test, electrochemical impedance spectroscopy (EIS) test.
In this study, it is important to find a correlation between adhesion of first and second coating.
Author(s)
김세환
Issued Date
2014
Awarded Date
2014. 2
Type
Dissertation
Publisher
부경대학교
URI
https://repository.pknu.ac.kr:8443/handle/2021.oak/1615
http://pknu.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000001967024
Affiliation
대학원
Department
대학원 공업화학과
Advisor
박진환
Table Of Contents
1. 서론 1
2. 이론적 배경 3
2.1 유기도막에 의한 방식기구 3
2.2 유기도막의 노화 메커니즘 5
2.2.1 유기도막 노화의 원인 5
2.2.2 유기도막 노화의 외적요인 7
2.3 epoxy 수지 도료 9
2.3.1 epoxy 수지의 경화 및 반응 메커니즘 9
2.3.2 epoxy 수지의 특성 12
2.3.3 epoxy 수지의 광노화 메카니즘 13
2.4 가속노화시험 17
2.5 교류 임피던스에 대한 이론 17
2.5.1 교류 임피던스의 기초 18
2.5.2 부식계의 등가회로와 교류 임피던스 특성 25
2.5.2.1 부식계의 등가회로 26
2.5.2.2 유기도막의 등가회로 27
2.5.3 임피던스 측정 결과 도시 방법 30
2.5.4 교류 임피던스의 측정 원리 35
2.5.5 교류 임피던스 측정법을 이용한 도장강판의 노화과정 관찰 37
2.6 태양광 총량에 의한 자연노화와 가속노화의 관계 40
2.6.1 대기중의 자외선 조사량과 QUV 시험과의 관계 40
3. 실험 방법 42
3.1 시료 42
3.1.1 epoxy 수지 42
3.2 시험편 제작 42
3.3 Experiment flow chart 43
3.4 가속노화시험 44
3.4.1 QUV test 44
3.4.2 Salt spray test 45
3.5 FT-IR(Spectrophotometer) 46
3.5.1 Attenuated Total Reflectance Spectroscopy(ATR) 47
3.5.2 도막표면의 흡광도 측정 (FTIR-ATR Spectroscopy) 47
3.6 교류 임피던스 측정 48
3.7 도막 부착력 시험 49
3.8 Creepage analysis 50
4. 결과 및 고찰 51
4.1 FT/IR-ATR에 의한 도막 표면의 흡광도 52
4.2 에폭시 도막의 임피던스 특성 변화 53
4.3 부착력 시험 결과 (Pull-Off test) 57
4.4 Corrosion creepage from scribe 결과 60
5. 결론 61
Reference 63
Degree
Master
Appears in Collections:
대학원 > 공업화학과
Authorize & License
  • Authorize공개
Files in This Item:

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.