PUKYONG

물 분사 방식을 도입한 다층 다단 다공성 플레이트 시스템의 집진 특성

Metadata Downloads
Alternative Title
Collection Characteristics of Multi-layer Multi-stage Porous Plate System with Water Spray
Abstract
Major wet scrubbers need high pressure drop and power cost. One important issue is that the leaking of dust and droplets needs to be prevented by installing a demister.
The wet scrubber has a big problem in regards to the maintenance of the demister. For this reason, a study of the ‘Collection Characteristics of Multi-layer Multi-stage Porous Plate System with Water Spray’ was needed. The study low-cost and high efficiency by making up for the weak points.
The reason for the study is to investigate a system which can provide high collection and long-term efficiency for minute particles without a demister.
An experiment on the decontamination efficiency of dust (fly ash) and gas (SO2) with Collection Characteristics of Multi-layer Multi-stage Porous Plate System with Water Spray will be conducted.
As a result of studies, it was shown that the pressure of the system was 154mmH2O (dry type), and 158mmH20 (wet type) at 5 stage and inlet velocity 3.53m/s. There was little increase of pressure drop according to spray water, but it was a very small pressure drop compared to the existing ventury scrubber (over 300mmH2O).
The collection efficiencies of fly ash was 89.3% (dry type), 98.6% (spray water 100ml/min), 99.7%(spray water 250ml/min) at 5stage, and inlet velocity 3.53m/s.
The removal efficiencies of SO2 was 62.5% (spray water 100ml/min), 75% (spray water 250ml/min) at 5stage, and inlet velocity 2.82m/s.
This system was able to highly collect dust and gas at the same time without installing a demister at low pressure drop.
Author(s)
김주연
Issued Date
2013
Awarded Date
2013. 2
Type
Dissertation
Publisher
부경대학교
URI
https://repository.pknu.ac.kr:8443/handle/2021.oak/24821
http://pknu.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000001966200
Alternative Author(s)
Kim, Ju Yeon
Affiliation
부경대학교 대학원
Department
대학원 환경공학과
Advisor
여석준
Table Of Contents
목 차 Ⅰ
그림차례 Ⅲ
표 차례 Ⅵ
Abstract Ⅶ

Ⅰ. 서론 1

Ⅱ. 이론적 배경 2
1. 세정 집진장치(Wet Scrubber) 2
1.1. 세정 원리 2
1.1.1. 직접차단(Interception) 2
1.1.2. 관성충돌(Inertial impaction) 3
1.1.3. 확산작용(Diffusion) 4
1.1.4. 응집작용 6
1.2. 세정 집진장치 종류 7
1.3. 세정 집진장치의 특징 11
1.4. 세정 집진장치의 장 · 단점 13
2. 입자의 충돌장치 14
2.1. 충돌(Impaction) 원리 14
2.1.1. 입자의 충돌이론 14
3. Stokes number 17
4. 침투도(Penetration) 18

Ⅲ. 실험장치 및 방법 23
1. 실험장치 23
1.1. 물 분사 방식을 도입한 다층 다단 다공성 플레이트 시스템 24
1.1.1. Stage의 단면도 25
1.1.2. Black box 26
1.2. 분진 공급장치 28
1.3. 흡입 송풍기 28
1.4. 가스 주입장치 28
1.5. Particle Counter 측정기(GRIMM Aerosol Dust Monitor & Counters)
28
1.6. 휴대용 연소가스 측정기(Portable Flue Gas Analyzer, E8500) 29
2. 실험용 분진 30
3. 실험 방법 31
3.1. 압력손실 특성 32
3.2. 집진효율 특성 32

4. 수치해석 방법 33
4.1. 유동 분포 및 입자궤적 해석 33
4.1.1. 유동장 지배 방정식 33
4.1.2. 입자운동 지배 방정식 35

Ⅳ. 실험결과 및 고찰 36
1. 압력손실 특성 36
1.1. 압력손실 36
1.1.1. Stage 수 증가에 따른 압력손실 특성 37
2. 입자상 오염물질의 집진효율 특성 39
2.1. 다층 다단 다공성 플레이트 시스템의 집진효율 특성 39
2.1.1. Stage 수 증가에 따른 집진효율 특성 39
2.1.2. 입구 농도에 따른 집진효율 특성 41
2.2. 물 분사 방식을 도입한 다층 다단 다공성 플레이트 시스템의 집진효율 특성 42
2.2.1. 물 분사량 100ml/min일 때 stage 수 증가에 따른 집진효율 특성
45
2.2.2. 물 분사량 250ml/min일 때 stage 수 증가에 따른 집진효율 특성
46
2.2.3. 입구 농도에 따른 집진효율 특성 47
2.2.4. 건식 및 습식 type 중 물 분사량 100ml/min 사용했을 경우 stage 수 증가에 따른 집진효율 특성 49
2.2.5. 건식 및 습식 type 중 물 분사량 250ml/min 사용했을 경우 stage 수 증가에 따른 집진효율 특성 51
2.2.6. 습식 type에서 물 분사량 변화에 따른 stage 수 증가에 따른 집진효율 특성 53
3. 가스상 오염물질의 제거효율 특성 55
3.1. stage 수 증가에 따른 SOx 제거효율 특성 55
3.2. 물 분사량에 따른 SOx 제거효율 특성 56
3.3. 유입유속에 따른 SOx 제거효율 특성 57

Ⅴ. 결론 58

참고문헌 60
Degree
Master
Appears in Collections:
대학원 > 환경공학과
Authorize & License
  • Authorize공개
Files in This Item:
  • There are no files associated with this item.

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.