D사의 넘어짐 재해조사와 재발방지대책
- Abstract
- Looking at the case of industrial accidents that occurred in the first half of 2021 (end of June) by the Ministry of Employment and Labor, the most common accident fatality was falling(210 people, 44.3%). Accident accident fall(12,134 people, 24.7%) occurred the most. In addition, a total of 1,072 injuries occurred between 2018 and the first half of 2021 (end of June) of company d to be studied. Analysis of falls by year: 151 falls(26.5%) in 2018, 79 falls(30.7%) in 2019, 61 falls (31.1%) in 2020, and 61 falls(31.1%) in 2021 In the first half of the year, there were 14 cases (40%) of falls, and the number of injured victims decreases every year, but the frequency of falls is increasing. Here, it can be seen that the fall accidents of elderly workers are more common with 28.8% of those in their 50s and 15.1% of those in their 60s. Falling is caused by various causes such as weather, working space, worker's health condition, unsafe behavior, and surrounding environment. Falling is a disaster caused by unsafe behavior of workers. It is to secure the safety of safety facilities from the planning stage, create a perfect safe environment in a timely manner, and reduce blind spots by participating in all construction performers. In addition, prior risk assessment procedures must be thoroughly implemented to continuously monitor, guide, and advise workers so that they do not engage in unsafe behavior. Therefore, it is necessary to eradicate industrial accident concealment of injury accidents so that the same injury accident does not repeat itself. In this study, direct cause(unsafe behavior, unsafe state), systemic cause (occupational cause, administrative cause, organizational cause), basic preventive measure(educational prevention) Countermeasures, technical preventive measures, administrative preventive measures), and the purpose of finding the cause of a fall disaster and suggesting improvement measures to prevent recurrence.
- Author(s)
- 강승지
- Issued Date
- 2023
- Awarded Date
- 2023-02
- Type
- Dissertation
- Keyword
- Falls, types of accidents, causes of accidents, preventive measures, unsafe behavior
- Publisher
- 부경대학교
- URI
- https://repository.pknu.ac.kr:8443/handle/2021.oak/32920
http://pknu.dcollection.net/common/orgView/200000666531
- Affiliation
- 부경대학교 산업대학원
- Department
- 산업대학원 안전공학과
- Advisor
- 장성록
- Table Of Contents
- 1. 서론 1
1.1 연구의 배경 1
1.2 연구의 목적 5
1.2.1 D사의 넘어짐 재해 발생 현황 5
1.2.2 D사의 재해 발생 형태 7
1.3 연구 방법 11
2. 재해사례 분석 13
2.1 발생 월별 재해 분석 13
2.2 발생 요일별 재해 분석 15
2.3 발생 시간대별 재해 분석 16
2.4 재해자 연령대별 재해 분석 18
2.5 근속 기간별 재해 분석 21
2.6 발생 장소별 재해 분석 24
2.7 공종별 재해 분석 26
3. 넘어짐 재해의 원인 분석 28
3.1 넘어짐 재해 직접 원인 분석 28
3.1.1 불안전한 행동 분석 30
3.1.2 불안전한 상태 분석 32
3.2 넘어짐 재해 간전 원인 분석 34
3.2.1 기술적 원인 35
3.2.2 교육적 원인 37
3.2.3 관리적 원인 39
4. 넘어짐 재해 감소를 위한 관리 방안 41
4.1 설문조사 41
4.1.1 설문분석 결과 43
4.1.2 작업공간의 선정 및 관리 항목 분석 결과 44
4.1.3 체계적인 교육활동 항목 분석 결과 45
4.1.4 선제적 계획관리 항목 분석 결과 46
4.2 작업공간의 선정 및 관리 48
4.2.1 사전 안전시설 설치계획 수립 48
4.2.2 자재, 장비의 운영 가설계획을 사전에 수립 50
4.2.3 위험성 평가 검토 52
4.2.4 사전에 공정의 간섭에 대한 협의 55
4.2.5 작업계획서 관리 56
4.2.6 주간/야간 작업순서의 선정 및 관리 57
4.2.7 BIM을 활용한 설계 사전 검토 57
4.3 체계적인 교육활동 58
4.3.1 TBM 활동 중 위험요인에 대한 교육 실시 58
4.3.2 신규근로자 교육 실시 58
4.3.3 작업순서에 대한 교육 실시 58
4.3.4 법정 안전교육 실시 59
4.4 선제적 계획관리 60
4.4.1 작업여건을 사전에 조성(돌발 작업 확인) 60
4.4.2 근로자의 출력 관리 및 건강상태 확인 60
4.4.3 관리감독자 구역 담당제 실시 61
4.4.4 임의작업 방지를 위한 근로자 통제 61
4.4.5 사전에 공정 간섭 협의 62
5. 결론 63
참고문헌 66
부록 68
설문지 68
- Degree
- Master
-
Appears in Collections:
- 산업대학원 > 안전공학과
- Authorize & License
-
- Authorize공개
- Embargo2023-02-08
- Files in This Item:
-
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.